Ecosalt2 Features - Davey EcoSalt 2 DES2-25EL Installations- Und Betriebsanweisungen

EcoSalt2 FEATURES

CONTROLLING CHLORINE OUTPUT
The CHLORINE OUTPUT controls the time that the cell is producing chlorine, as a percentage of total time
that the EcoSalt2 is on. If the EcoSalt2 cell is producing, it is producing at 100%, unless otherwise altered
(see sections WINTER MODE, or SPA MODE). The cell run time is referred to as "cell duty cycle".
For example:
• If the EcoSalt2 is on for 8 hours per day, and the CHLORINE OUTPUT is set to 50%: the EcoSalt2 cell
duty cycle is only 4 hours, of that day;
• If the EcoSalt2 is on for 8 hours per day, and the CHLORINE OUTPUT is set to 25%: the EcoSalt2 cell
duty cycle is only 2 hours, of that day.
To adjust the CHLORINE OUTPUT:
> Press the menu up/down buttons to scroll to your chosen CHLORINE OUTPUT;
> The setting will change the cell duty cycle by 5% increments;
> Press menu/setting select once your preferred CHLORINE OUTPUT is displayed;
> This will then take you back to the HOME screen.
ACTIVATING COVER MODE
A pool's exposure to UV contributes significantly to the pool's total chlorine demand. Ie the amount of
chlorine the pool uses. Excessive amounts of chlorine in a pool with a cover on, can significantly shorten the
life expectancy of the pool cover, if left for long periods of time (eg weeks). Turning on the COVER MODE
reduces the cell duty cycle by 80% of its current setting.
For example:
• If the EcoSalt2 is on for 8 hours per day, the CHLORINE OUTPUT is set to 50%, but the COVER MODE is
on: the EcoSalt2 cell duty cycle is only 48 minutes, of that day;
• If the EcoSalt2 is on for 8 hours per day, the CHLORINE OUTPUT is set to 25%, but the COVER MODE is
on: the EcoSalt2 cell duty cycle is only 24 minutes, of that day.
65% – 09:35 AM
0N
70% – 09:35 AM
CHLORINE OUTPUT
13