Declaration Of Conformity - SIOUX STP10 Series A Bedienungsanleitung Und Teileliste

TO TAP A HOLE
• Make sure the hole to be threaded is the proper size for the tap.
• Apply a thread cutting lubricant.
• Hold the tap square and in line with the hole.
• Start the tool.
• When the tap reaches the desired depth, press the reverse button on top of the tool to reverse the rotation of the tool.
Be ready for this reverse force. Have a firm footing at all times. Keep a firm grip on the tool at all times.
We, Sioux Tools Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, declare under our sole responsibility that the products
to which this declaration relates are in conformity with the following standard or standards or other normative document or documents:
May 1, 2009
Murphy, North Carolina, USA
Date and place of issues
Form ZCE781
WARNING
When the rotation of the tool is reversed, the force on your hand will reverse.
Reversal of force can cause injury.
SOUND AND VIBRATION READINGS
*Sound Pressure
Catalog No. dBA
STP10P3C 80.0
STP10P3C20 80.0
STP10P3C32 80.0
STP10S3B12 77.7
STP10S5B12 77.7
STP10S7B12 77.7
STP10S12B12 77.7
*per PN8NTC1

DECLARATION OF CONFORMITY

STP10 SERIES
EN 792, ISO 12100-1, ISO 12100-2, ISO 8662, Pneurop PN8NTC1
following the provisions of
Robert Hartman
Vice President and General Manager-Power Tools
Sioux Tools Inc
Name and position of issuer
*Sound Power *Vibration
dBA
91.6 Less than 2.5
91.6 Less than 2.5
91.6 Less than 2.5
89.3 Less than 2.5
89.3 Less than 2.5
89.3 Less than 2.5
89.3 Less than 2.5
*per PN8NTC1 *per ISO 8662
97/35/EC.
3
m/s
2
Signature of issuer
2013February1/E
Date