Declaration Of Conformity - SIOUX 2 1/2-Serie Anweisungen & Teileliste

5. Align the screw hole in the adjusting nut with the desired slot and reinstall the 07096 screw.
6. Reinstall drive spindle or connector.
7. Reinstall the angle head assembly or front bearing support.
8. Test tool.
9. Repeat steps 3 through 6 until desired torque setting is reached.
Approximate
Output Torque
In. Lb.
We, Sioux Tools Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, declare under our sole responsibility that the products
2L1108TC, 2L1208TC, 2L1308TC, 2L2108TC, 2L2208TC, 2L2308TC, 2LX1108TC, 2LX1208TC, 2LX1308TC, 2LX2108TC, 2LX2208TC,
to which this declaration relates are in conformity with the following standard or standards or other normative document or documents:
June 1, 2003
Murphy, North Carolina, USA
Date and place of issues
CHART FOR APPROXIMATE TORQUE SETTING OF CLUTCH
MARK
Turns of Adjustment Nut From Mark On Clutch Case
SOUND AND VIBRATION READINGS
*Sound Pressure *Sound Power
Catalog No. dBA
2L1108TC 78.5
2L1208TC 78.5
2L1308TC 78.5
2L2108TC 78.5
2L2208TC 78.5
2L2308TC 78.5
2LX1108TC 78.5
2LX1208TC 78.5
2LX1308TC 78.5
2LX2108TC 78.5
2LX2208TC 78.5
2LX2308TC 78.5
*per PN8NTC1

DECLARATION OF CONFORMITY

2LX2308TC including QTC, ATC, & BTC Suffixes
EN 792 (draft), EN 292 Parts 1&2, ISO 8662, Pneurop PN8NTC1
following the provisions of
89/392/EEC as amended by 91/368/EEC & 93/44/EC Directives.
Gerald E. Seebeck
President
Sioux Tools Inc.
Name and position of issuer
*Vibration
dBA m/s 2
94.8 Less than 2.5
94.8 Less than 2.5
94.8 Less than 2.5
94.8 Less than 2.5
94.8 Less than 2.5
94.8 Less than 2.5
94.8 Less than 2.5
94.8 Less than 2.5
94.8 Less than 2.5
94.8 Less than 2.5
94.8 Less than 2.5
94.8 Less than 2.5
*per PN8NTC1 *per ISO 8662
Signature of issuer
3
SILVER SPRING
Spring rate—22 In. Lb.
per turn standard on
#1 low speed tools.
(Example 2A2 1 08TC)
BLUE SPRING
Spring rate—14 In. Lb.
per turn standard on
#2 medium speed tools.
(Example 2A2 2 08TC)
GREEN SPRING
Spring rate—9 In. Lb. per
turn standard on
#3 higher speed tools.
(Example 2A2 3 08TC)