Herunterladen Inhalt Inhalt Diese Seite drucken

Important Information For Set Up - Adam Sub2100 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für Sub2100:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Important information for set up

Acclimation:
a)
After having unpacked your subwoofer, please allow the system to acclimate
to the temperature of the room for approximately an hour.
Solid stand:
b)
It is important to ensure the subwoofer sits firmly on a solid surface!
Transportation/packaging:
c)
We recommend that you retain the original packaging, as it is the best way to
guarantee safe transportation should the need to do so arise.
Break-in time:
d)
Please note that the subwoofers will take some break-in time to achieve
optimum sonic performance.
Danger from high SPLs:
e)
Exposure to high sound pressure levels may cause permanent hearing
loss! Please do not get close to the subwoofers when using them at high
volumes.
f)
Placement:
Please note, that for a seamless integration between the subwoofer and the
main speakers, placement is very important (see p. 7).
LEDs:
g)
There are two LEDs on the front.
The upper diode ("On") will glow green during operation.
The lower one ("Standby-Protect") will blink once when the subwoofer is
being switched on. This does not indicate an overload but the control function
of the protective circuit. Only if the diode glows red during operation this
indicates an overload.
LED 1: green, indicating operation
LED 2: blinks red once when sub is
switched on
3.
Information for Set Up
fig. 1: LEDs
5

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis