auna MC-30 DAB Handbuch Seite 35

Scanning for DAB stations
With DAB radio, additional stations and services regularly become available
so it's a good idea to carry out a manual scan every now and then to make
sure that you have the most up to date station listing stored within the
memory of your Micro System.
If you have moved your Micro System to another location, e.g.: if you go on
holiday, then it's also a good idea to carry out a manual scan.
In DAB mode:
Press and release the Play/Pause button on the Micro System or the Scan
button on the remote control to begin a search for stations. The display will
change to 'Scanning...'. A progress bar will show the progress of the scan
and the number of stations found during the scan will also be displayed.
Prune DAB stations
You can remove the DAB stations in the station list that cannot be received
in your area. These are listed with a '?' prefix.
1. Press and hold the Menu button on the Micro System or on the remote
control. Use the rotary control on the Micro System or the Previous/
Next buttons on the remote control to move to Prune Invalid. Press the
rotary control on the Micro System to Select or the Select button on the
remote control.
2. Proceed to prune the invalid stations Yes No is displayed. Use the
Previous/Next buttons on the Micro System or on the remote control
to move to 'Yes'. Press the rotary control on the Micro System to Select
or the Select button on the remote control to prune the invalid stations
from the station list. Stations with a '?' prefix will now no longer be
displayed.
3. Press and release the Menu button on the Micro System or on the
remote control to exit from the Menu.
EN
35