Description Of Footbath; Initial Use; Use - Beurer FB 30 Gebrauchsanweisung

6. Description of footbath

3
4
5

7. Initial use

• Remove the packaging
• Fold open the foldable foot bath by e.g. pressing against the base of the foot bath with one hand
and pulling the upper edge of the foot bath upwards with the other hand.
1
• Check the device, power supply and cables for damage.
• Before you plug in the foot bath, fill it up to the fill-level mark (approx 6 cm full) with either warm or
cold water. The foot rest should, however, be completely covered with water.
• Route the cable safely so that there is no risk of anyone tripping over it.
• Place the foot bath on a firm and level surface.
Make yourself comfortable in a chair and place your feet on the foot rest and apply slight pressure.
Never stand up in the foot bath. The rubber feet on the base of the unit prevent it from sliding.

8. Use

Switch on the device. To do this, press the function button [2].
The vibration massage, bubble massage and maintains water temperature are started simultaneously.
The infrared light dots are activated by pressing again.
Press the function button [2] again to turn off all functions.
1
2
2
1. Splash protection
2. Function button
3. Fill-level mark
4. Bubble bar
5. Pedicure attachment
6. Infrared light dots
7. Foot rest with massage nodules
8. Draining outlet
9. Cord winder (on underside of device)
6
8
13
9
7
3