Herunterladen Diese Seite drucken

X-lander X-Move Gebrauchsanweisung Seite 13

Vorschau ausblenden Andere Handbücher für X-Move:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 15
14. DISASSEMBLING THE STROLLER SEAT
In order to disassemble the stroller seat, press the unlocking buttons and
take it out of the assembly sockets (fig. a). Disassemble the adapters by
pressing the unlocking button (fig. B).
15. BRAKE
To apply the brake: push the pedal down with your foot. To release the brake
pick its bar up.
16. ATTACHING THE CARRYCOT
In order to attach the carrycot, use the adapters. Place the adapters inside the
assembly sockets in the frame and attach t he c arrycot b y lo cking it in th e a dapters.
Note: Before use, make sure the carrycot is correctly attached.
17. DISASSEMBLING THE CARRYCOT
In order to disassemble the carrycot, press the unlocking buttons and take it out
of the assembly sockets (fig. a). Disassemble the adapters by pressing the
unlocking button (fig. b).
18. ATTACHING THE SEAT
In order to attach the seat, use the special adapters. Place the adapters inside
the assembly sockets in the frame and attach the seat by locking it in the adapters.
Note: Before use, make sure the seat is correctly attached.
19. DISASSEMBLING THE SEAT
In order to disassemble the seat, press the unlocking buttons on both sides of
the seat and take it out of the assembly sockets. Disassemble the adapters by
pressing the unlocking button.
20. LED LIGHTS
The stroller frame features LED lights which light the way in front of the stroller.
The ON button is located on the stroller frame as shown in the picture below.
The batteries are located on the bottom of the footrest. In order to install the
batteries LR 44, unscrew the screw shown in the picture and take off the casing.
21. ADJUSTING OF HARNESS
Change of straps length in the harness by sliding the regulator to the one
side or the other, adapting it to the child's body.
22. BUCKLE
To unfasten the buckle, press the buttons and pull the fastening part out
of the casing. To fasten the buckle, insert the fastening part into the casing
until it has engaged.
WARNINGS AND POINT OF ATTENTION
Based on effectuated tests, Deltim declares that the delivered stroller
complies with all requirements of PN-EN1888/2003 + A1/A2/A3:2005 norm.
Read these instructions carefully before use and keep them for future
reference. Your child's safety may be affected if you do not follow these
instructions. The stroller is designed to transport one child who can sit up
unassisted (over 6 months). Maximum weight of the child: 15 kg.
12

Werbung

loading