Herunterladen Diese Seite drucken

X-lander X-Move Gebrauchsanweisung Seite 12

Vorschau ausblenden Andere Handbücher für X-Move:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 15
1. UNFOLDING THE FRAME
Undo the folding blockade (fig. a). Unfold the frame by lifting the handle until
the locks click into position (fig. b).
WARNING: Before use, make sure that the folding mechanisms are blocked.
2. FOLDING THE FRAME
Take the carrycot or seat off the frame. Unblock the locks on both sides of
the stroller by pressing the pedals marked as 1 (fig. a) and 2 (fig. b) in
sequence. Fold the frame as shown below (fig. c).
3. MOUNTING OF THE FRONT WHEEL
In order to mount the wheel, slide it onto the axle until the lock is engaged.
4. DISMOUNTING OF FRONT WHEEL
In order to take the wheel off, push the button shown on the figure , and pu ll
the wheel off the axis.
5. ASSEMBLY AND DISASSEMBLY OF REAR WHEELS
To assembly or disassembly the wheel, push rubber button, which is in the
middle of the wheel.
6. WHEEL BLOCKADE
The stroller is provided with swiveling front wheels. A special lever blocks
the wheel swiveling movement. After the lever has been pressed, the
wheels will only move forward. To release the blockade, lift the lever.
7. INFLATING WHEELS
To inflate a wheel, unscrew the valve's cotter. Place the pump on the valve
and inflate the wheel. The maximum allowed wheel pressure is 1.5 bar.
8. INSTALLING OF THE BUMPER BAR
Push in the ends of the bumper bar into mounting holes , unti l locks are
snapped.
9. TAKING THE BUMPER BAR OFF
Push in the buttons of the bumper bar locks and slide its end out of the moun-
ting holes. The bumper bar may be tilted, when undone only from single side.
10. FOOTREST ADJUSTMENT
Press the buttons on both sides of footrest and adjust it to the required
position.
11. BACKREST ADJUSTMENT
Pick up the tie and put up the backrest in required position.
12. ATTACHING THE SHOPPING BASKET
Push the plastic latches on the basket into the assembly bolts.
13. ATTACHING THE STROLLER SEAT
In order to attach the stroller seat, use the adapters. Place the adapters
inside the assembly sockets in the frame and attach the seat by locking it
in the adapters.
Note: Before use, make sure the seat is correctly attached.
11

Werbung

loading