Guarantee And Service - Philips FC8284 Bedienungsanleitung

English
10

guarantee and service

If you need service or information or if you have a problem, please visit the Philips website at
www.philips.com or contact the Philips Consumer Care Centre in your country (you find its
phone number in the worldwide guarantee leaflet). If there is no Consumer Care Centre in your
country, go to your local Philips dealer.
troubleshooting
This chapter summarises the most common problems you could encounter with the appliance. If
you are unable to solve the problem with the information below, contact the Consumer Care
Centre in your country.
Problem
The suction
power is
insufficient.
Possible cause
The dust container is
full.
The filter cylinder is
dirty.
The Clean Air HEPA
outlet filter is dirty.
The electronic suction
power control is set to
a low setting.
The nozzle, tube or
hose may be blocked.
Solution
Empty the dust container.
Clean the filter cylinder (see chapter 'Cleaning').
Replace the Clean Air HEPA outlet filter (see
chapter 'Replacing the Clean Air HEPA outlet
filter).
Set the electronic suction power control to a
higher setting.
Disconnect the blocked-up item and connect it (as
far as possible) the other way around. Switch on
the vacuum cleaner to force the air through the
blocked-up item in opposite direction.