Control Modes; Dmx-Describtion - Litecraft OutLED AT10 Bedienungsanleitung

Control Modes

DMX-Describtion

display
LITECRAFT
SW.V *.*
DEF. SET
YES
DEF. SET
NO
FixHours
***** h
SAFETY
HOT OFF
SAFETY
HOT LOW
DispPerm
ON
DispPerm
OFF
mode
1 channel
mode
2 channel
mode
3 channel
mode
4 channel
mode
8 channel
mode
20
function
shows the software version direct after switching on the unit
*.* = software-version
alle settings will be set to factory defaults (DMX-4CH, address 001)
all settings (DMX mode/macro etc. ) will not be changed – this menue disappears
automaticly after 5 seconds
*****= fi xture working hours
LEDs will switch off due to too high internal temperature
LEDs will reduce driving about 25%
display permanent on
display switches off after 10 s and switches on by pressing any button for at least 3 s
display
DMX-1CH
DMX ***
*** = DMX adress
DMX-2CH
DMX ***
*** = DMX adress
DMX-3CH
DMX ***
*** = DMX adress
DMX-4CH
DMX ***
*** = DMX adress
DMX-8CH
DMX ***
*** = DMX adress
function
ch1 = color macro mode
(43 colors + black)
ch1 = color macro mode
(43 colors + black)
ch2 = dimmer
ch1 = dimmer red
ch2 = dimmer green
ch3 = dimmer blue
ch1 = dimmer red
ch2 = dimmer green
ch3 = dimmer blue
ch4 = dimmer amber
ch1 = dimmer red
ch2 = dimmer green
ch3 = dimmer blue
ch4 = dimmer amber
ch5 = color macro mode
0-13 no macro
14-255 pre-programmed colors
ch6 = strobe/speed
0-15 no strobe
16-255 strobe 16 speed values
ch7 = mode
0-35 no function
36-71 automtic ramp up */**
72-107 automatic ramp down */**
108-143 automatic ramp up/down */**
144-179 automatic color mix mode
180-215 random 3-colors *
216-251 random 7-colors *
252-255 audio mode
ch8 = dimmer
* speed value by channel 6
** color value by channel 1, 2, 3, 4