LANCOM CC series Erste Schritte Seite 22

LANCOM CC Routers
IP address:
IP mask:
Password:
Repeat:
Seed:
SSH key:
Config file:
8
First Steps
Here you assign a unique IP address to the device, which is to
be used by the device for its operations. This box is grayed out
if a script or configuration file has been selected.
Please enter the subnet mask for your IP address. This box is
grayed out if a script or configuration file has been selected.
Enter the password for the LANCOM CC router here. The min-
imum password length is 8 characters and it must contain
uppercase and lowercase letters, numbers and special char-
acters. If you activate the check box "Show", the password is
displayed in plain text and the repeated input is not necessary.
This box is grayed out if a script or configuration file has been
selected.
Repeat the password input. This box is grayed out if a script
or configuration file has been selected.
A highly secure seed is required to initialize the random num-
ber generator.
First, make sure that the USB card reader is properly con-
nected. In order to generate random numbers, the smartcard
included in the scope of delivery of the LANCOM CC Start-up
Kit has to be inserted into the USB card reader. This creates a
secure random number, which is ready for upload to the
device.
Alternatively, you can use also a new ID card (nPA – Germany
only) instead of the smart card.
For CC-compliant operation, each LANCOM CC device must
use its own SSH host key. Here you have the option of using
the wizard to create a new SSH key, or of selecting your own
SSH key for upload.
If under the item Configuration you chose the option Script or
configuration file, you specify the location of the correspond-