LANCOM CC series Erste Schritte Seite 17

Power supply voltage
Please make sure you use only the power adapter shipped with this product.
The use of the wrong power adapter can be a hazard to the device or persons.
The datasheet is available for download from the LANCOM website
(www.lancom.eu).
Setting up, mounting and commissioning
Observe the installation instructions with particular regard to the environmen-
tal conditions, stackability, etc., as outlined in the User Manual or in the Hard-
ware Quick Reference.
Some devices (e.g. those with an integrated ADSL modem) can become very
warm during operation. For these models, environmental temperatures are
not to exceed 35°C. Sufficient ventilation is of vital importance. Do not stack
the devices and do not expose them to direct sunlight.
Antennas are only to be attached or changed when the device is switched off.
Mounting or demounting antennas while the device switched on may cause
the destruction of the radio module! When installing outdoor antennas, the
instructions on installation and grounding in the LANCOM Outdoor Wireless
Guide must be observed.
Please observe that a device in CC-compliant operating mode must be
C
kept in a secure environment without access to third parties.
General safety
This device is powered by electricity. Adhere strictly to the safety requirements
outlined in the operating instructions with regard to the voltages to be
applied.
Never operate damaged components. Turn a device on only if the housing is
closed.
Opening the housing is reserved exclusively for the manufacturer's authorized
technicians. Never insert pointed objects (thin screwdrivers, wires, etc.) into
the product's interior. Risk from electric shock!
Any work required for the electrical installation must be carried out by a
trained electrician.
Make sure that the electrical installation complies with local or national safety
requirements.
LANCOM CC Routers First Steps
3