LANCOM CC series Erste Schritte Seite 21

You can start the wizard in various ways. It can either be started directly by
LANconfig after finding the device automatically, or the wizard can be manu-
ally started under
Tools > Start CC Start- up
Use the drop-down menus and fields to specify the necessary settings.
COM port: Select the COM port through which the computer is con-
nected to the LANCOM CC router. To determine the COM port
used by Windows, use the Device Manager under the entry
"Ports (COM & LPT)".
Firmware: Enter the storage location of the firmware file here.
Checksum: Enter the checksum from the BSI certificate report corre-
sponding to your firmware here.
Configuration: Here you decide whether to use the wizard to create a new
configuration or choose an existing configuration in the form
of a script or configuration file.
Device name: Enter the new device name for the LANCOM CC router here.
This box is grayed out if a script or configuration file has been
selected.
LANCOM CC Routers
Wizard....
First Steps
7