Axis 2420 Bedienungsanleitung Seite 22

Configuring Your Camera
22
Applications Tool Description
Operation Choose to run your AXIS 2420 in Sequential or Alarm Mode, and specify how and where images will be uploaded.
Note that you must enable your application by following the Enable link. If there is already an older application
present, then this must first be disabled before you enable your new application.
Motion Create and enable in-picture motion detection windows. These are used to trigger alarms whenever significant
Detection movement occurs in the detection window. Create up to three drag-and-drop windows and restrict alarms to
movement in specific areas. Each motion detection window has a set of profile sliders for making individual
settings.
Layout Determine the Layout for the Web page in which your images will appear. Customize the page to your own design
and include your own logos, links and title texts, and enable or disable specific function buttons.
Wizards Description
Installation The Installation Wizard helps you quickly get the product up and running. Recommended for use by both novices
and experienced users alike.
Application This Wizard will guide you through the process of setting up your application.
Support Description
General Displays various useful information about how and where to get help.
Release Notes View the product Release Notes, the Parameter List, and/or initiate a Restart of the unit.
Parameters Displays the complete list of settings currently valid in the unit.
Log File Displays the log file showing all of the commands executed since the last restart.
Restart/ Reset Provides commands for restarting the unit and for resetting to the factory default settings.
About Displays information about the development of this product.
Help Starts the product's on-line help.
Live View Opens the product's home page.
DHCP
DHCP (Dynamic Host Configuration Protocol) is a protocol that lets network administrators
centrally manage and automate the assignment of Internet Protocol (IP) addresses in an
organization's network.
Important!
DHCP should only be enabled if you know which IP address the AXIS 2420 will get from the DHCP server,
or if your version of DHCP can update a DNS server, which then allows you to access the AXIS 2420 by
name. If DHCP is enabled and you cannot access the unit, you may have to reset it to the factory default
settings (see page 30) and then perform the installation again (see page 12).
AXIS 2420 User's Manual