Bang & Olufsen BeoSound 1 Kurzanleitung Seite 42

CD test modes
TM 61: Focus ON
TM 62: Focus OFF
TM 63: Starts motor
TM 64: Stops motor
TM 65: Move laser out
TM 66: Move laser in
TM 67: Start CD
TM 68: Stop CD
Beo4 commands; fi nd SHIFT in the "list" and then press following sequence:
9 0 2 5 8
All CD test modes demand that CD is selected after those Beo4 commands.
The CD-pen will try to focus.
This TM can only be turned off by using TM 62.
The CD-pen will be turned OFF.
Starts turntable motor.
This TM can only be turned off by using TM 64.
Turns off the turntable motor.
Light pen to outermost position.
The optical pick-up unit goes to the outermost position and stays there.
This TM can only be turned off by TM 66. Do not give other commands in the
meantime.
Light pen to the innermost position.
The optical pick-up unit goes to the innermost position and stays there.
The CD starts playing.
This TM can only be turned off by TM 68. Do not give other commands in the
meantime.
The CD stops playing.
When error in CD-TM the error-number refers to TM 27 CD-errors.
Adjustments, English 5.9