Bang & Olufsen BeoSound 1 Kurzanleitung Seite 39

5.6 Adjustments, English
TM 43 : Get speaker value
TM 44 : Set speaker value
Adjustment when replacing the speakerunits
Shows the sensitivity of a speaker. The value is between -6 dB and 6 dB.
The display shows "SPno".
To choose a speaker a digit must be keyed in when display shows "no _".
"no 1" = Left treble speaker
"no 2" = Left middle range speaker
"no 3" = Bass speaker
"no 4" = Right middle range speaker
"no 5" = Right treble speaker
The display will show a value for the chosen speaker.
O
Press or STORE to end TM.
Sets the sensitivity of a speaker. The value have to be between -6 dB and 6 dB.
The display shows "SPno" in 1.5 second.
To choose a speaker a digit must be keyed in when display shows "no _".
"no 1" = Left treble speaker
"no 2" = Left middle range speaker
"no 3" = Bass speaker
"no 4" = Right middle range speaker
"no 5" = Right treble speaker
T
Press or STOP to choose negative dB = "dB - _" or
O
Press or STORE to choose positive dB = "dB _"
Then key in the dB value.
O
Press or STORE to end TM.
Value on the back of the unit
-3.5 - -2.5
-2.4 - -1.5
-1.4 - -0.5
-0.4 - 0.4
0.5 - 1.4
1.5 - 2.4
2.5 - 3.4
Value to store in TM 44
dB -3
dB -2
dB -1
dB 0
dB 1
dB 2
dB 3