Bang & Olufsen BeoSound 1 Kurzanleitung Seite 11

2.2 Brief operation guide, English
Tune in radio stations
Search tuning
Manual tuning
Press <RADIO or RADIO> to switch on the radio.
l n
Press or to see the frequency in the display.
l n
Press or again to start the search tuning function.
During tuning, the frequency is shown in the display.
Press STORE when the requested station is found.
The fi rst available program number will blink in the display.
l n
Press or to change the program number, if you like.
Press STORE to store the station on the displayed program number.
l n
Press or twice to resume search tuning and repeat the procedure when the
station you want is found.
Note: If you do not wish to store a found station, you resume search tuning by
l n
pressing or .
When search tuning does not produce a specifi c radio station, you can perform
manual tuning to store the specifi c station.
Press <RADIO or RADIO> to switch on the radio.
l n
Press or to see the frequency in the display.
Press again to start the search tuning function.
During tuning, the frequency is shown in the display.
Press STOP during search tuning to perform manual tuning.
l n
Keep or pressed down to tune up or down the frequency band.
The frequency is shown in the display and the last digit is blinking.
Press STORE when the requested station is found.
The fi rst available program number is displayed.
l n
Press or to change the program number
Press STORE to store the radio station on the displayed program number
if you like
, .