Bang & Olufsen BeoSound 1 Kurzanleitung Seite 37

5.4 Adjustments, English
Master test modes
TM 20: Check display (LED)
TM 23: Get software version
Note!
TM 24: Get service counters
Turns on all digits. Used to compare intensity of the LEDs.
O
Press or STORE to end test mode.
APP = application software.
After 1.5 sec. the display shows x.xx.
O
Press or STORE to continue.
OS = operation system.
After 1.5 sec. the display shows x.xx.
O
Press or STORE to continue.
a
r = radio.
After 1.5 sec. the display shows x.xx.
O
Press or STORE to continue.
Cd = compact disc.
After 1.5 sec. the display shows x.xx.
O
Press or STORE to end test mode.
CD and Radio SW version is only registered if they have been powered on once
and CD have to be selected once in TM.
Time for standby, Radio, CD and AUX gives the total "power on" time.
All numbers are stated in interval of 10. (e.g. 3 = 30.)
OFF = Standby (hours in standby)
After 1.5 sec. the display shows xx.xx.
O
Press or STORE to continue.
a
r = Radio (hours in radio mode)
After 1.5 sec. the display shows xx.xx.
O
Press or STORE to continue.
Cd = CD (hours in CD mode)
After 1.5 sec. the display shows xx.xx.
O
Press or STORE to continue.
Au = AUX (hours in AUX mode)
After 1.5 sec. the display shows x.xx.
O
Press or STORE to continue.
PrOn = time the theft protection has been enabled. After 1.5 sec. the display
shows xx.xx.
O
Press or STORE to continue.
UnLo = number of times the theft protection has been unlocked.
After 1.5 sec. the display shows xx.xx.
O
Press or STORE to continue.
On = number of times the product is powered on.
After 1.5 sec. the display shows xx.xx.
O
Press or STORE to end test mode.