Bang & Olufsen BeoSound 1 Kurzanleitung Seite 10

BRIEF OPERATION GUIDE
Switch on the radio
Switch on the CD player
To listen to the radio, just press one of the radio buttons, the radio will start
playing on the radio station you last listened to.
You extend the built-in aerial by pressing the AERIAL button.
You can store up to 59 different radio stations in your BeoSound 1.
To step between stored radio stations, the program number must be shown in the
display.
If no CD is loaded when you press one of the CD buttons, the CD compartment
raises, ready for you to load a CD.
When the CD has stopped playing and no command has been received for 30
minutes, BeoSound 1 switches to standby.
You can adjust and store the volume level at any time.
The display will keep you informed of what you have chosen and you can set the
display light to a level suitable for you.
When you press <RADIO or RADIO> before any radio stations have been stored,
the radio will fi nd the fi rst available station.
Press <RADIO or RADIO> to switch on the radio.
The program number is shown in the display.
When the program number is shown in the display, press <RADIO to step down
and RADIO> to step up through the stored stations. Keep the button pressed
down to 'search' through stored stations.
Press STANDBY to switch BeoSound 1 to standby.
Press AERIAL to extend or retract the built-in aerial.
When you search through a CD, searching will continue as long as you keep the
button pressed down. The CD resumes playing, when the button is released.
Press <CD or CD> to switch on the CD player.
The track number is shown in the display.
Press <CD to step to the previous track. Press CD> to step to the next track.
l
Press to search backwards through the CD.
n
Press to search forwards through the CD.
Press STOP to pause the CD.
Press STOP again to resume play-back.
Press LOAD to open or close the CD compartment.
Brief operation guide, English 2.1