•
Connect Rubber Ring (#26) and Front Cover (#25) to Console Support (#4).
•
Connect Console Cable Group (#60c) to Console Cable Group (#60d).
•
Connect Pulse Cable Group (#61c) to Pulse Cable Group (#61d).
•
Insert Console Support (#4) into Main Frame Assembly Part (#1*) and
secure it into place using Bolts (#21), Spring Washer (#22) and Arc
Washer (#52).
•
Connect Rubber Ring (#26) to Front Cover (#25) and put them into the
correct position together.
•
Connect Small Handlebar Assembly Part (#5*) to Console Support (#4)
with Bolts (#21), Spring Washers (#22) and Arc Washer (#52).
•
Connect Left Front Cover (#14) and right Front Cover (#15) to the left
and right of Small Handlebar Assembly Part (#5*), then fix them on the
Console Support (#4) with Bolts(#8).
•
Connect Console Cable Group (#60a) to Console Cable Group (#60b).
•
Connect Pulse Cable Group (#61a) to Pulse Cable Group (#61b).
•
Connect Console (#9) to Console Support (#4) with Bolts (#89).
5
EN
49