Health Hazard; Operating Determinations - Omnitronic SDP-1 Bedienungsanleitung

Never put any liquids on the device or close to it. Should any liquid enter the device nevertheless, disconnect
from mains immediately. Please let the device be checked by a qualified service technician before you
operate it again. Any damages caused by liquids having entered the device are not subject to warranty!
Always disconnect from the mains, when the device is not in use or before cleaning it.
Please note that damages caused by manual modifications on the device or unauthorized operation by
unqualified persons are not subject to warranty.
CAUTION: Turn the amplifier on last and off first!
Keep away children and amateurs!
By operating an amplifying system, you can produce excessive sound pressure levels that may
lead to permanent hearing loss.
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.

3. OPERATING DETERMINATIONS

The SDP-1 has been specially designed for professional DJ applications. The unit features many functions
that precisely meet the requirements of DJs, e.g. beat counter, adjustable pitch, cueing, seamless playback
of a continuous loop, single title replay, or search via rotary wheel.
The SDP-1 has two player mechanisms which replay SD cards with titles in the MP3 format. SD cards with
a capacity of up to 4 GB can be used. The unit is not compatible with SDHC (high capacity) cards and only
supports the MP3 format.
The SDP-1 is provided with an unlimited anti-shock memory which is able to compensate shocks or
vibrations.
This product is allowed to be operated with a direct current of 6 V, 50/60 Hz and was designed for indoor use
only.
The device must only be operated with the included power unit. The power unit falls under protection-class 2
and the SD card player under protection-class 3.
Do not shake the device. Avoid brute force when installing or operating the device.
When choosing the installation spot, please make sure that the device is not exposed to extreme heat,
moisture or dust. There should not be any cables lying around. You endanger your own and the safety of
others!
The ambient temperature must always be between 0° C and +40° C.
The relative humidity must not exceed 50 % with an ambient temperature of 40° C.
This device must only be operated in an altitude between -20 and 2000 m over NN.
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation!
Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
Please use the original packaging if the device is to be transported.
Never remove the serial barcode from the device as this would make the guarantee void.

HEALTH HAZARD!

23/39 00032609.DOC, Version 1.0