Solution Filter Cleaning - Nilfisk-ALTO SCRUBTEC R 361 Betriebsanleitung

ENGLISH

SOLUTION FILTER CLEANING

1. Drive the machine on a level floor.
2. Turn the ignition key (41) to "0".
3. Close the solution tap (E, Fig. 6) under the machine, behind the right rear wheel. The tap (E) is closed when it is in the position
(F) and it is open when it is in the position (G).
4. Remove the transparent cover (A), then remove the filter strainer (E) under the machine, in front of the right rear wheel. Clean
and install them on the support (C).
NOTE
The filter strainer (B) must be correctly positioned on the housing (D) of the support (C).
5. Open the tap (E).
22
USER MANUAL
SCRUBTEC R 361 - R 366 - R 371 - R 371 C
Figure 6
S311214A
9097421000(1)2008-01 A