Jetter JX3-BN-EC Betriebsanleitung Seite 54

Jetter AG
JX3-BN-EC Betriebsanleitung
Sub-
Beschreibung/
Index in-
Name
dex
0xA000 Status Module:JX3-THI2-TC
:0x0 SubIndex 000
:0x1 Channel 1.Common.State
:0x2 Channel 1.Common.Value in Fahrenheit
:0x3 Channel 1.Common.Ice point compensati-
on
:0x4 Channel 1.Common.10ms Conversion ac-
tive (0=100ms)
:0x5 Channel 1.Common.Value Valid
:0x6 Channel 1.Common.Channel is calibrated BOOL
:0x7 Channel 1.Common.Forcing enabled
:0x8 Channel 1.Common.show temperature of
thermocouple (0= show temperature of
icepoint)
:0x9 Channel 1.Common.temperature is shown
(0=Voltage of thermocouple)
:0xa Channel 1.Common.Calibration active
:0xb Channel 1.Common.Channel 1 active
:0xc Channel 1.Common.Start Reset (synchro-
nous)
:0xd Channel 2.Common.State
:0xe Channel 2.Common.Value in Fahrenheit
Programmierung | 7
Typ Zugriff
USINT ro
UDINT ro
BOOL ro
BOOL ro
BOOL ro
BOOL ro
ro
BOOL ro
BOOL ro
BOOL ro
BOOL ro
BOOL ro
BOOL ro
UDINT ro
BOOL ro
54 / 88