Seite 1
All manuals and user guides at all-guides.com JX3-DMS2 Dehnungsmessmodul Jetter AG Kontakte: Gräterstraße 2 E-Mail - Vertrieb: sales@jetter.de D-71642 Ludwigsburg E-Mail - Hotline: hotline@jetter.de Germany Telefon - Hotline: +49(0)7141/2550- Installationsanleitung Artikel-Nr.: 60872977 | Version 1.10 Juli 2018 / Printed in Germany Laden Sie die Betriebsanleitung von www.jetter.de unter Downloads...
Seite 2
All manuals and user guides at all-guides.com Konfiguration Das Modul JX3-DMS2 ist direkt anschließbar an den JX3-Systembus. Es wird über ein JX3-BN-xxx, ein JX3-PS1 oder über eine JetControl mit JX3-Systembusanschluss mit Spannung versorgt. Montage Schritt 1 Schalten Sie zur Montage und Demontage alle JX3-Module der JX3-Station spannungslos.
Seite 3
All manuals and user guides at all-guides.com LEDs leuchtet Alle grün: Spannungsversorgungen in Ordnung leuchtet rot: Kommunikation zum JX3-BN-xxx oder zur JetControl mit JX3-Systembusanschluss ist nicht aktiv D1 leuchtet rot: Kurzschluss Kanal 1 D2 leuchtet rot: Kurzschluss Kanal 2 D2 blinkt rot: Bootloader ist aktiv D1 blinkt im Skalierungsfehler Kanal 1...
Seite 4
All manuals and user guides at all-guides.com Anschlussbeschreibung Klemmpunkt X 61 - Signale resistiver Sensor 1 X61.UV1+ Spannungsversorgung+ für Sensor (+5 V/100 mA) X61.US1+ Nicht anschließen X61.UD1+ Signal+ des Sensors X61.UD1- Signal- des Sensors X61.US1- Nicht anschließen X61.UV1- Spannungsversorgung- für DC5V 100mA Sensor...
Seite 5
All manuals and user guides at all-guides.com Leiteranschluss X61/X62 Technologie: Zugfederanschluss Schraubendreher: SD 0,4 x 2,5 - DIN 5264-A AWG: 16 ... 28 Eindrähtig: H05(07) V-U 0,2 mm 1,5 mm Feindrähtig: H05(07) V-K 0,2 mm 1,5 mm Mit Aderendhülse: 0,2 mm ...
Seite 6
All manuals and user guides at all-guides.com...
Seite 7
Installation Manual Item # 60872977 | Revision 1.10 July 2018 / Printed in Germany Download the user manual from www.jetter.de, Downloads. Scope of delivery 10000612 JX3-DMS2 60869252 10-pin connector, spring-cage connection 60870410 Keying pins 10 x 60870411 Terminal labels 60872977 Installation Manual...
Seite 8
All manuals and user guides at all-guides.com Configuration The module JX3-DMS2 can directly be connected to the JX3 system bus. It is supplied with power from a JX3-BN-xxx, a JX3-PS1, or a JetControl with JX3 system bus connection.
Seite 9
All manuals and user guides at all-guides.com LEDs Green, lit: All power supplies are ok Red, lit: Communication with JX3-BN-xxx, or a JetControl with JX3 system bus connection is not active D1 Red, lit: Short circuit: Channel # 1 D2 Red, lit: Short circuit: Channel # 2 D2 Red, flashing:...
Seite 10
All manuals and user guides at all-guides.com Description of connections Terminal X61 - Signals of resisitive point sensor 1 X61.UV1+ Power supply (+) for sensor (+5 V/100 mA) X61.US1+ Do not connect X61.UD1+ Sensor: Signal+ X61.UD1- Sensor: Signal- X61.US1- Do not connect X61.UV1- Power supply (-) for sensor DC5V...
Seite 11
All manuals and user guides at all-guides.com X61/X62 - Wiring Technology: Spring-cage connection Screwdriver: SD 0.4 x 2.5 - DIN 5264-A AWG: 16 ... 28 Solid conductor: H05(07) V-U 0.2 mm 1.5 mm Flexible conductor: H05(07) V-K 0.2 mm 1.5 mm With wire end ferrule: 0.2 mm ...
Seite 12
All manuals and user guides at all-guides.com...