Troubleshooting - Wohler VIS 2000PRO Bedienungsanleitung

11. Troubleshooting

10.2 Copying images to the PC
To copy images from a CompactFlash card to the PC simply drag them from the
drive allocated to the CompactFlash card and copy them to a suitable disk on
your PC. The images are stored in standard JPEG/MOV format and can be edi-
ted or printed from any suitable application, such as Paint Shop Pro.
10.3 Copying images to the CompactFlash card
Images created by the PRO monitor and edited on the PC can be copied back to
the CompactFlash card for subsequent display on the PRO monitor. You can also
create JPEG images on the PC and copy them to the PRO monitor for display. In
this case the JPEG image must be the correct size and aspect ratio for the PAL
or NTSC display. In addition it must comply with the JPEG baseline image speci-
fication, and be encoded in 4:2:2 format for correct color rendition.
11. Troubleshooting
This chapter provides answers to typical questions and problems that may arise
when using the PRO monitor.
11.1 Why can't I display images from the gallery?
Images can only be displayed if they were captured using the same video stan-
dard as the current setting of the PRO monitor. Either switch off the PRO mo-
nitor, connect an appropriate video source, and switch it on again so the auto-
detection selects the new video standard, or set the VIDEO STANDARD option
to NTSC or PAL; see Section 9.21 (To specify the video standard for replaying
images).
11.2 Why are the images not displayed chronologically after copying them
from a PC?
If image files are copied back onto a CompactFlash card from a PC, the order
of the files will be determined by the PC directory listing order, which is not the
same as the order in which they were captured. Unfortunately there is no way to
modify this.
11.3 The frozen image appears to jitter?
If the frozen S T I L L image appears to jitter, due to movement between the two
fields of the full frame image, the PRO monitor allows you to double-up a single
field to remove the jitter:
° Press OK while the image is frozen. S T I L L. One of the two sequential fields is
then doubled up to create a flicker-free image at half the resolution. The display
shows Double-Field Mode to show that only one field will be saved. You can
58 Hotline: 0 29 53 / 73 211
Colour Monitor VIS 2000
Fax: 0 29 53 / 73 250
PRO