Wohler VIS 2000PRO Bedienungsanleitung Seite 53

9. Configuring the PRO-Monitor
To scroll up and down the main menu selections use the v and b keys. To
enter a selection and to view the submenu:
°
n.
Press
9.2 Video settings
The VIDEO STANDARD, IMAGE FREEZE, and RECORD TIME options on the
Main Menu allow you to configure the video operation of the PRO monitor.
9.2.1 To specify the video standard for replaying images
This setting is retained when the PRO monitor is switched off. Normally AUTO is
the recommended setting. With this option the PRO monitor automatically sets
the standard based on the current video source, and retains the settings even
when the video source is disconnected. However, you can only replay images
saved with the current video standard. If you want to replay images on the PRO
monitor of either standard, without a video input connected, set the VIDEO
STANDARD option to NTSC or PAL as appropriate.
M A I N M E N U
– – – – – – –
V I D E O S T A N D A R D > S e l e c t
– – – – –
° Choose AUTO for auto-detection of the video standard from the current video
input, NTSC to set the standard to NTSC, or PAL to set the standard to PAL.
9.2.2 To specify the image freeze mode
By default the IMAGE FREEZE option is set to FRAME, which captures both
frames of the video image. You can override this on an individual image basis.
The FIELD option sets double-field mode for all images by default. This is useful
if most images you capture are of moving objects.
M A I N M E N U
– – – – – – – –
I M A G E F R E E Z E >
e-mail: mgkg@woehler.de
Colour Monitor VIS 2000
AU T O
N T S C
P A L
S e l e c t
— — — — — —
F R A M E
F I E L D
http://mgkg.woehler.de
PRO
53