Power Save; Transferring Images To A Pc - Wohler VIS 2000PRO Bedienungsanleitung

10. Transferring Images to a PC

M A I N M E N U
– – – – – – – – –
T O P L I N E >
saving
B O T T O M L I N E>
the
Toggle to the line you wish from the menu.
° Press OK to enter and toggle between ON, OFF using the v or  keys.
° Use OK to select. The choice will immediately show on the screen and the sub-
menu will disappear.
9.6

Power Save

The Power Save options on the Main Menu allows you to select between five
different auto-off time.
M A I N M E N U
– – – – – – – –
P O W E R S A V E > S e l e c t
10. Transferring Images to a PC
This chapter describes how to install the card reader, software supplied with the
PRO monitor, and use it to copy images between a CompactFlash card and PC,
or format new CompactFlash cards.
10.1 Installing the Card Reader and Software
The PRO Monitor set comes with a high speed, USB 2.0 CompactFlash l/ll
reader. PCs running Windows 2000ME or later should recognize the card reader
automatically and install the appropriate driver when you plug it into the port, in
which case you do not need to perform any installation. If the card reader is wor-
king correctly, Windows will allocate a drive letter, such as D: or E: to the reader.
You can then use it just like another disk drive. Please read the instructions on
the back of the Card reader for minimum system requirements and appropriate
installation instructions for your system.
e-mail: mgkg@woehler.de
Displays next file number that will be assigned on
Displays the date and time set in the system as well as
distance measurement if that option is available and
activated.
— — — — — —
O F F
30 S E C
1 M I N
5 M I N
10 M I N
http://mgkg.woehler.de
Colour Monitor VIS 2000
PRO
57