Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
16
4.4
User code programming
Three additional user codes can be programmed along with the main code in the door code unit if
required.
These codes cannot authorise continuous unlocking and can be deleted at any time in a short
operation (see 4.5).
An index must be applied to these codes if they are to be individually activated during programming
or deletion. This index consists of the numbers "1", "2" or "3".
The respective index should be given priority over the new code during programming between
two actuations of the
The programming sequence is clarified in the following example:
Example:
The number sequence 4521is to be programmed as a second user code.
+
2
+
4 5 2 1
+
4.5
Deleting a user code
The index of the respective code must be known to delete a user code.
Example:
The user code with index 2 is to be deleted.
+
2
-
Mounting and Operating Manual
+
key.
Open the unit with the key
Activate programming mode by actuating the programming key
Switch to index input
Index "2" for new user code to be programmed
Switch to code input
Input of code numbers
Acknowledge and exit programming mode
Open the unit with the key
Activate programming mode by actuating the programming key
Switch to index input
Input index of code to be deleted
Delete the code by actuating the "-" key
Compact Door Code Unit
Werbung
Kapitel
Inhaltsverzeichnis
