Taking Out Of Operation; Small Repairs - Do It Yourself - Kranzle Round Cleaner UFO light Originalbetriebsanleitung

Taking out of operation

Taking out of operation
1. Switch off the high pressure cleaner
2. Cut off the water supply
3. Open the trigger gun with safety catch briefly until the pressure is released
4. Apply safety catch on the trigger gun
5. Remove Kränzle Round Cleaner
6. Check if the rotor is tangled with threads etc.
7. Use a paper clip to check if the nozzles are clogged
(siehe kleine Reparaturen selbstgemacht)
Cleaning and care
Put the Round Cleaner on to the floor in such a way that the splash protection
brush cannot be deformed due to rough ground.
16

Small repairs - do it yourself

Problem
No water comes from the nozzle but the pressure gauge shows full pressure.
Cause
Most probably the nozzle is clogged.
Straighten a paper clip.
Clean the nozzle with the straightened
paper clip.
Rinse the high-pressure hose.
And you can proceed with the
high-pressure cleaning as before!
EN
17