High/Low Power (This Feature Is Only Available In The Us Version); Tdr; Save; Tot - Radioddity FS-T1 Handbuch

3. Press the [MENU] key to select.
4. Use the △ and ▽ keys to select: 0/1/2/3/4/5
5. Press the [MENU] key to confirm and save.
6. Press the [MONI] key to exit.

HIGH/LOW POWER (This feature is only available in the US version)

Procedure 3.7 setting transmission power
1. Press the [MENU] key to enter the menu.
2. Use the △ and ▽ keys to enter menu-07:PWR
3. Press the [MENU] key to select.
4. Use the △ and ▽ keys to select: HIGH/LOW
5. Press the [MENU] key to confirm and save.
6. Press the [MONI] key to exit.

TDR

Simultaneously monitor A and B. The display with the most recent activity (A or B) becomes the
selected display TDR.
Procedure 3.8 setting TDR
1. Press the [MENU] key to enter the menu.
2. Use the △ and ▽ keys to enter menu-08:TDR
3. Press the [MENU] key to select.
4. Use the △ and ▽ keys to select: OFF/ON.
5. Press the [MENU] key to confirm and save.
6. Press the [MONI] key to exit.

SAVE

In the power saving mode, the communication range will be reduced, but the cruising ability will
be extended by 2-3 times. In the non-power saving mode, the communication range can reach
the maximum, but the cruising ability will be reduced.
Procedure 3.9 setting SAVE
1. Press the [MENU] key to enter the menu.
2. Use the △ and ▽ keys to enter menu-10:SAVE.
3. Press the [MENU] key to select.
4. Use the △ and ▽ keys to select: ON/OFF
5. Press the [MENU] key to confirm and save.
6. Press the [MONI] key to exit.

TOT

This feature provides a safety switch, which limits transmission time to the programmed value.
This will promote battery conservation by not allowing you to make excessively long
transmissions, and in the event of a struck PTT switch, it can prevent interference to other
users as well as battery depletion.