Herunterladen Diese Seite drucken

Your Device At A Glance; Assembly - Lux Tools KSS-85 Originalbetriebsanleitung

Werbung

Kettenschaerfgeraet_302121.book Seite 33 Freitag, 27. Mai 2016 7:29 07
• Keep your workplace clean. Mixed contami-
nation by various materials is particularly dan-
gerous. Light metal dust (e.g. aluminium) can
ignite or explode easily.
• Never use the power too with a damaged
cable. Do not touch a damaged cable and pull
out the power plug. Damaged cables increase
the risk of electric shock.
• Prevent overheating of the device and the
work piece. Excess heat may damage the tool
and the device.
• Shortly after being used, the tool may be very
hot. Allow a hot tool to cool down. Touching
a hot tool may cause burns.
• Never clean a hot tool with flammable liq-
uids. There is a risk of fire and explosion.
• Keep the handles dry and free of grease.
Slippery handles can lead to accidents.
• Always comply with the all applicable domes-
tic and international safety, health, and work-
ing regulations. Inform yourself before you start
work about the regulations that apply at the site
of the device.
• Remember that moving parts may also be
located behind ventilation and venting slots.
• Symbols affixed to your tools may not be
removed or covered. Information on the device
that is no longer legible must be replaced imme-
diately.
Read the operating manual before using
the device
Pull out the power plug before conducting
any maintenance work on the device
Risk of damage to the eyes! Never look di-
rectly into the LED.
Risks caused by vibrations
CAUTION! Risk of injury due to vibra-
tions! Vibrations may, in particular for per-
sons with circulation problems, cause dam-
age to blood vessels and/or nerves.
If you notice any of the following symp-
toms, stop working immediately and con-
sult a doctor. Numbness of body parts, loss
of sense of feeling, itching, pins and nee-
dles, pain, changes in skin colour.
The vibration values specified in the technical data
represent the main uses of the device. The actual
existing vibrations during use may deviate from
these as a result of the following factors:
• Incorrect use of the product;
• Unsuitable tools inserted;
• Unsuitable material;
• Insufficient maintenance.
You can reduce the risks considerably by following
the tips below:
– Maintain the device in accordance with the
instructions in the operating instructions.
– Avoid working at low temperatures.
– When it is cold, make sure your body and your
hands, in particular, are kept warm.
– Take regular breaks and move your hands at the
same time to promote circulation.
Personal safety equipment
Wear ear protection
Wear safety glasses
Wear a dust mask
Wear protective gloves
Residual risks
Even with proper use of the device and observance
of all safety regulations contained in these instruc-
tions, the following residual risks may occur:
• Coming into contact with the running grinding
wheel in the unprotected area.
• Kickback of workpieces and workpiece parts.
• Flying sparks are created when metal is ground.
Risk of fire! Keep persons and flammable mate-
rials away from flying sparks.
• Caution when using chainsaws. Danger of cuts!

Your device at a glance

► P. 3, item 1
1. Handle
2. Protective hood
3. LED
4. Grinding wheel
5. Quick adjustment knob for sharpness depth
6. Mounting holes
7. Fixing nut for sharpening angle
8. Scale for sharpening angle
9. Adjusting screw for stopper
10. Chain clamp
► P. 4, item 2
11. On/off switch
12. Chain guide
13. Stopping cover
14. Chain tensioner
15. Spanner for chain clamp
16. Base frame
17. Adjusting screw for sharpening depth
Scope of delivery
• Operating manual
• Chain sharpener
• Spanner for chain clamp

Assembly

DANGER! Risk of injury! The device may
only be operated when firmly mounted to a
workbench.
GB
33

Quicklinks ausblenden:

Werbung

loading