Care And Maintenance - Intenso PHOTOAGENT Bedienungsanleitung

Please note:
 The plug must be placed next to the device so to be easily accessible.
 Do not open the box of the line adapter. If the box is open, there is danger of life caused by
electric shock. The product does not contain parts to be maintained.
 Actuate the line adapter only with earthed plugs of AC 100-240V~, 50/60 Hz. If you are not
sure about the provision of electricity at the installation point, ask your energy provider.
 Use the included line adapter and line connection cable only.
 To interrupt the power supply of your equipment, unplug the adapter. While you are
unplugging it, always hold the adapter. Do never pull the cable.

CARE AND MAINTENANCE

Care

In order to prevent danger from electric current do neither remove screws nor the case of the weather station .

Do not operate this device near water. Do not expose the device to rain and moisture . Do not put any objects which store water or
other fluids near the device.

Do not install the picture near heaters, ovens or other heat issuing devices.

Do not open the case. Do not try to repair the device yourself but have it repaired by qualified personnel only.

Avoid using the device on sandy areas.

Fully insert the power supply plug into the opening of the Intenso weather station. This will prevent electrostatic charge.

Correctly and safely connect all ports.

Do not push onto the display. Protect the display from direct sunlight.

The picture frame only plays compatible data formats .

Images may be protected by the rights of third persons . The play back without licence may infringe copyrights .

When in operation, do not touch the Intenso weather station with metal objects.

Avoid operating the device on pillows, sofas or other objects which support the development of heat as there is danger of
overheating of the device.

Do not remove memory cards during read operation. This may cause system crash or data loss.

Do not switch off the device during an ongoing slide show.

Do not wrap up the device directly after longer use. Ensure sufficient enough cooling. Otherwise, there is danger of overheating .

In order to ensure a better service, changes of the operating instructions may be necessary.
Maintenance of the device
The device must be switched off.
Never spray or apply a fluid directly onto the display or case .
Cleaning the displays / case / frame
Carefully wipe the case, frame and LCD display with a soft cloth free from lint and chemicals. Only use cleaning agents which are
specifically designed for LCD displays.
Disposal of electrical waste
Devices marked with this symbol are subject to the EG Directive 2002/96/EG.
All electrical appliances and old appliances must be disposed off separately from the household waste and are to be returned to the state authorities
designed for that purpose.
By correctly disposing of electrical old appliances environmental damage may be prevented.
GB - 4