Environment Concerns; Declaration Of Conformity - Klarstein 10027725 Anschluss- Und Anwendungshinweise

Attemperation
Click the power switch in the boiling water status and press the attemperation switch in order to
regulate the temperature. After setting, the digital display fl ickeres 3 times and then gets into the
state of heat. It turns off automatically and get into the state of boiling water when it has reached
the chosen temperature. The ceiling is from current temperature to 100°C, +/-5°C for one press. In
this state if press the power switch again, then it will turn back to the standby status and shows the
current temperature of the water.
Keep Warm Function
In the standby status, press briefl y the keep warm button (2), it will get into the state of keeping
warm and shows the default temperature of 50°C. After the temperature fl ickered 5 times, the regu-
late temperature will be on standby. Without the operating, it will get into the state of heat preser-
vation, when it heats up to the chosen temperature. It will turn off the heat, "di-di-di" sound will be
heard fi ve times in succession. Then the diplay shoes the prompt that the device gets into the keep
warm status with a long "di" sounded. During the process of heat preservation, the temperature can
be arbitrary regulation. Press it again, it will stop heating preservation and display the actual tem-
perature.
Keep Warm Attemperation
In the keep warm status, press the attemperation switch, to regulate the temperature. Aafter set-
ting, the digital display fl ickered 5 times, then get into the state of heat. It turns off automatically
and gets into the state of keep warm when it has reached the chosen temperature. The ceiling is
from 40°C to 90°C, +/-5°C for one press.
Protective Function
• If the water kettle overheats due to lack of water, it switches off automatically while both, the light
and the display expire. This function is not an error but a protective function. Once the kettle has
cooled down, it can be used as usual.
• If the sensor of the heating plate is shorted you hear a double beep and the unit turns off auto-
matically.
According to the European waste regulation 2002/96/EG this symbol on the product
or on its packaging indicates that this product may not be treated as household was-
te. Instead it should be taken to the appropriate collection point for the recycling of
electrical and electronic equipment. by ensuring this product is disposed of correctly,
you will help prevent potential negative consequences for the environment and hu-
man health, which could otherwiese be caused by inappropriate waste handling of
this product. For more detailled information about recycling of this product, please
contact your local council or your household waste disposial service.
Producer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin.
This produkt is conform to the followring European Directives:
2014/30/EU (EMC)
2014/35/EU (LVD)
2011/65/EU (RoHS)
5

Environment Concerns

Declaration of Conformity