Hilti TE 30 Original Bedienungsanleitung Seite 20

Weight in accordance with EPTA procedure 01
Ø hammer drill bits
Ø drill bits for wood
Ø drill bits for metal
4.2 Noise information and vibration values determined in accordance with EN 60745
The sound pressure and vibration values given in these instructions have been measured in accordance
with a standardized test and may be used to compare one electric tool with another. They may be used
for a preliminary assessment of exposure. The data given represents the main applications of the electric
tool. However, if the electric tool is used for different applications, with different accessory tools, or is poorly
maintained, the data may vary. This may significantly increase exposure over the total working period. An
accurate estimation of exposure should also take into account the times when the tool is switched off, or
when it is running but not actually being used for a job. This may significantly reduce exposure over the
total working period. Identify additional safety measures to protect the operator from the effects of noise
and/or vibration, for example: maintenance of the electric tool and the accessories, keeping the hands warm,
organization of work patterns.
Noise emission values
Sound (power) level (L
WA
Uncertainty for the sound power level (K
Sound pressure level (L
Uncertainty for the sound pressure level (K
Total vibration
Vibration emission value for drilling in metal
Uncertainty
Hammer drilling in concrete (a
Uncertainty (K)
Chiseling (a )
h, Cheq
Uncertainty (K)
5 Operation
5.1 Preparations at the workplace
CAUTION
Risk of injury! Inadvertent starting of the product.
▶ Unplug the supply cord before making adjustments to the power tool or before changing
accessories.
Observe the safety instructions and warnings in this documentation and on the product.
5.1.1 Fitting the side handle
1. Release the side handle clamping band by turning the handle grip.
2. Slide the side handle clamping band over the chuck from the front and into the recess provided.
3. Bring the side handle into the desired position.
4. Tighten the side handle clamping band by turning the handle grip.
5.1.2 Adjusting the depth gauge (optional)
1. Press the release button on the side handle.
2. Adjust the depth gauge to the desired drilling depth.
14 English
Printed: 14.05.2018 | Doc-Nr: PUB / 5324616 / 000 / 01
)
)
WA
)
pA
)
pA
)
h, HD
2
3
Model
TE 30
4.1 kg
6 mm ... 28 mm
3 mm ... 25 mm
3 mm ... 13 mm
TE 30
103 dB(A)
3 dB(A)
92 dB(A)
3 dB(A)
TE 30
2.6 m/s²
1.5 m/s²
16.8 m/s²
1.5 m/s²
•/•
•/•
TE 30­AVR
4.2 kg
6 mm ... 28 mm
3 mm ... 25 mm
3 mm ... 13 mm
TE 30­AVR
103 dB(A)
3 dB(A)
92 dB(A)
3 dB(A)
TE 30­AVR
4.4 m/s²
1.5 m/s²
9.3 m/s²
1.5 m/s²
9.2 m/s²
1.5 m/s²