ATE BFCS 300 Anleitung Seite 30

Displaying the status of the short-term
counter
The short-term counter documents the
number of measurements carried out.
• Press the "Memory" button until the
indicator lamp flashes
(approx. 3 seconds)
= The number of measurements (since
the last time the short-term counter
was reset) is displayed.
Resetting the short-term counter
(figures on page XV)
1. Switch the device off and wait until all
of the indicator lamps have gone off
(approx. 2 seconds)
2. Press the "Print" button
3. Press the "Print" button while
switching on the device and release
the button after 4 seconds
= The short-term counter is reset
to "0". The device is now ready for
measurements.
Displaying the status of the long-term
counter (figures on page XV)
The long-term counter documents the
number of all measurements carried out
previously up to 9999.
• Switch the device off and on again
= The number of all measurements
carried out previously is displayed for
5 seconds.
Note: The long-term counter can-
not be reset. If you exceed 9999
measurements, the counter jumps
back to 1.
Manual – BFCS 300
25
English