Seculife Im Operation; Preparation; Duration Of Display - Continuous Operation; Functioning Of The Seculife Im - Kometec SECULIFE IM M688D Bedienungsanleitung

3

Functioning of the SECULIFE IM

3.1

Preparation

First remove the snap-on cover and open the battery compartment at the back of the meter. Insert the
battery included with the meter (1.5 V size AA, IEC LR6) in the battery compartment.
Care should be taken to place the battery correctly according
to the polarity indications "+" and "-" in the battery compartment.
When the battery warning symbol ( ) appears in the display,
the battery must be replaced.
The values in the measurement data memory and also the preset
individual values will be maintained, even when the battery is changed.
3.2 Duration of Display – Continuous operation
If for approx. 4 minutes none of the keys of the SECULIFE IM is pressed, the instrument will be
switched off automatically. During the last 4 seconds before automatic switch off an acoustic signal will
sound. By pressing any one of the keys, you can override the automatic switch off. When the
instrument is switched off, the values stored in the data memory and also the preset individual values
will be maintained. You can override the automatic switch off, when switching on the instrument and
simultaneously keep the HOLD key depressed.
The measuring unit (cd/m² or fL) in the display will blink and indicate that the continuous operation mode
is on.
6
GMC-I Gossen-Metrawatt GmbH