4.4.2
„Mem" – Storing measurement value in memory
The measurement value to be memorized is locked by the Hold
Hold
key in the display. By pressing the key Mem you will enter the
value to be stored in the next free memory location. An acoustic
signal confirms „value stored in memory".
The display indicates the stored measurement value alternating
with the number of the memory location for a few seconds.
Subsequently, the SECULIFE IM will return to the measuring
function. When the memory is completely filled, the display will
show „FLL".
Mem
GMC-I Gossen-Metrawatt GmbH
9