4.4
Memory Functions
The SECULIFE IM is provided in addition to the „Display Hold" also with a memory for data up to 100
measurement values.
This function allows several measurement operations in the field and read-out at a later time. The data
stored in the memory will be maintained, even when the instrument is turned off or the battery is
changed.
4.4.1
„HOLD" Display Hold Function
The display HOLD function allows you to measure even at very low light levels, where it would be
difficult to read the display. By pressing the HOLD key, the last value measured is held on the display to
be read at brighter light. Pressing the HOLD key again will return the SECULIFE IM to the measuring
function.
The function HOLD is the basic function for all the memory functions.
8
Hold
GMC-I Gossen-Metrawatt GmbH