Mem Edit" - Deleting A Value In Memory And Enter A New Value - Kometec SECULIFE IM M688D Bedienungsanleitung

4.4.3 „Mem-Edit" – Deleting a value in memory and entering a new value
The Mavolux offers the function „Mem Edit" for correcting a
Hold
value stored in the memory. Measure again, press the Hold key
and the new value is locked. Then by pressing one of the range
keys, you can browse through the memory.
Mem
10
At the memory location to be
corrected press now the key
Mem. An acoustic signal confirms
„value stored in memory". In the
display the measurement value
stored is indicated for a few
seconds alternating with the
number of the memory location.
Subsequently the
SECULIFE IM will return to
measuring function.
GMC-I Gossen-Metrawatt GmbH