Application, Scope Of Delivery And Accessories; Symbols Used In This Manual; Proper Use; Scope Of Delivery - EFA SB 287 E Betriebsanleitung, Wartungsanleitung, Ersatzteilliste

1. Application, scope of delivery
and accessories
Important notes!
This manual has been specifically compiled for
machine operators. Keep it near the machine for
future reference!
The band saw may only be operated:
for the intended purpose, with due care as
regards safety, and if the equipment is in proper
working order
if all safety devices are properly mounted
according to the safety instructions in this
manual
after instruction of the operating personnel, who
must also have read and understood the
instructions in chapter 2 "Safety instructions"
(page 2) and chapter 3 "Commissioning and
operational safety" (page 3).
This is necessary in order to prevent incorrect
operation and to enable operators to assess
potential risks accurately.
Never reach into the operating
range of the saw band as limbs
could be severed!
Always wear goggles or other
effective eye protection!

1.1 Symbols used in this manual

Danger:
Proceed with extreme caution. In the
event of incorrect operation, there is a
risk of injury to operating staff and other
persons. There is also a risk of damage
to the machine.
Information:
This symbol highlights sections in the
text containing important information
and useful hints.
Schmid & Wezel
D 75433 Maulbronn

1.2 Proper use

1.2.1 Applications
EFA SB 287 E
Only for small plants processing max. 100
animals per week; designed for the splitting
of hogs and cattle.
The machine is not designed for any other use. If
you wish to use the equipment for other purposes,
first consult Schmid & Wezel GmbH & Co (S&W).
If the machine is used for any other purposes,
please note that there is a greater risk of serious
injury and increased wear to machine parts. The
operator shall be solely liable for any damage arising
from improper use of the equipment.
1.2.2 Residual risks
As the band saw is designed for the industrial
processing of animals, there is a risk of serious
injury to persons, if it is not handled with the
necessary caution. If handled improperly or without
due care, persons might even be killed instantly, or
die as a consequence of serious blood loss. It is
therefore imperative that the band saw is handled
properly and according to the instructions in this
manual.

1.3 Scope of delivery

Band saw
Operating manual

1.4 Accessories

For order numbers of standard equipment and
accessories, please refer to Appendix A (page 13)
and Appendix A.5 (page 18).

2. Safety instructions

2.1 General safety instructions

When operating the band saw, always adhere
to the following safety instructions:
Before replacing the saw bands, or carrying out
installation, maintenance or repair work,
disconnect the machine from the power supply
line.
Wear personal protective equipment that is
appropriate for your work.
Only personnel who have been properly trained
and instructed in the safe use of the band saws
Page / Seite
14 / 27
Version/ Ausführung
09.2012