Use; Meaning Led Lights - Paj GPS POWER FINDER Bedienungsanleitung

protective rubber to the right. Subsequently, the LED
lights are activated. As soon as you have got a GPS
reception, the blue LED flashes.
Recommended first step: To receive the best GPS
signal place the POWER Finder outside and make
sure it is not covered. Avoid garages, basements
and similar.

2.6 Use

Once the activation, switching on and the transfer of
a first database has been successful, you can place
the FINDER in a location of your choice and take a
look at the FINDER´s location by using a smartphone,
tablet or PC. Use our app or go to the following
website:
www.finder-portal.com
The FINDER-portal will introduce you to its
functions step by step.

2.7 Meaning LED lights

S
IGNAL
The green LED is off
The green LED flashes
every 2-3 seconds
S
IGNAL
The blue LED flashes
every 2-3 seconds
The blue LED is off
The blue LED lights
constantly up
POWER Finder by PAJ with Online-Tracking V.1.1 EN
© PAJ UG (haftungsbeschränkt)
16
Green LED - GPRS status
M
EANING
Standby mode
GPRS module available
Blue LED - GPS status
M
EANING
GPS module available
Standby mode
The GPS tracker will go
into standby mode after
not being moved for a
while. You can activate the
tracker by either moving it
or calling the device. The
GPS Tracker will
automatically switch back
on.
No signal available.
GPS tracker is searching
for a signal.