For Your Safety; Safety Instructions; Personal Protective Equipment - Fein SCT 5-40 M Bedienungsanleitung

SCT 5-40 (U)M - Buch Seite 9 Mittwoch, 5. November 2003 10:37 10
SCT 5-40 M / SCT 5-40 UM
Operating instructions for magazine holder.
Overview.
1 Magazine holder
Push the magazine holder onto the
screwdriver bit and position it as far as
the stop on the spindle collar of the
drive machine.
2 Hand strap
For holding the device firmly and less-
ening the strain on the hand.
3 Torque adjusting screw (SCT 5-40 UM)
For setting the torque.
4 Selector switch for clockwise and
anti-clockwise rotation
Select when power tool is at a stand-
still.
5 Switch
For switching ON/OFF (a),
Lock for continuous mode (b).

For your safety.

Before using this power tool, read
and comply with:
these operating instructions,
the operating instructions for the
magazine holder (document
number 3 41 01 044 06 5),
the enclosed safety instructions (docu-
ment number 3 41 30 054 06 1),
the relevant national industrial safety
regulations.
These operating instructions and the
enclosed safety instructions should be
kept carefully for later use and enclosed
with the power tool, should it be passed
on or sold.
Intended use.
This power tool is intended for:
commercial use in industry and trade,
for driving and removing screws, espe-
cially for use in drywall construction using
fast feed screws, self-drilling screws and
wooden screws,
for applications using the accessories given
in these operating instructions, or those
recommended by FEIN.

Safety instructions.

!
Risk of injury
Hold the power tool firmly.
Only work with undamaged insert.
Beware of any concealed electric cables,
gas or water conduits; check the working
area with a metal detector, for example.
Do not rivet or screw any name-plates or
signs onto the power tool. The protective
insulation can thereby be rendered inef-
fective. Adhesive labels are recom-
mended.
Only use an undamaged plug and cable.
!
Damage to property/material
The mains voltage must correspond with
the voltage specifications on the power
tool.

Personal protective equipment.

When using this power tool wear the fol-
lowing protective items:
sturdy shoes, hair net (for long hair).
EN
9