Timer Mode; Activating­and­deactivating­ The­alarm - Grundig Sonoclock 600 Handbuch

TIMER­MODE
Setting­the­time
1
Switch the device to standby with
»ON/OFF«.
2
Press and hold »SET/TIME« for two sec-
onds to activate the setting.
– Display: The time flashes.
3
Press »TUN+/HR« to set the hours.
– Display: The time flashes.
4
Press »TUN–/MIN« to set the minutes.
5
Press »SET/TIME« to confirm the setting.
Alarm­mode
Setting­the­alarm­time
Note:
The time must be correctly set.
7
1
Switch the device to standby with
»ON/OFF«.
2
Press and hold »ALARM« for two sec-
onds.
3
Press »TUN+/HR« to set the hours.
4
Press »TUN–/MIN« to set the minutes.
5
Press »ALARM« to confirm the setting.
6
Press briefly »ALARM« to select the de-
sired sound source radio station (»
or buzzer(» «).
– The device wakes you up at the
set time, the alarm duration is 59
minutes.
­ - ----------------------------------------------------------------------------------------------------------------
«)
§
Interrupting­the­alarm
1
Press »SNOOZE­­
is sound.
– The alarm signal (radio station or
signal) stops.
– The alarm signal goes on again at
nine-minute intervals.
Cancelling­the­alarm
1
Press »ON/OFF« while the alarm is
sound.
Activating­and­deactivating­
the­alarm
1
In standby mode, press »ALARM« until
the » « or »
§
Sleep­timer
1
To set the switch-off time (»120« – »I5«
minutes), press »SNOOZE­ ­
peatedly.
2 To switch off the sleep timer before the
set time press »SNOOZE­­
the switch-off time to »OFF«.
« while the alarm
O
« display disappear.
O
« to set
O
ENGLISH
« re-
­ 1 3