Klarfit Runtasy SE Handbuch Seite 37

Music Playback via BT
You need a Smartphon with long distance wireless connectivity for audio.
Settings Tap on the phone, find the BT function in the settings, turn on BT and
point to search for BT, a BT name will appear on the phone. BT connection and
then search the phone to connect some music playback, it will automatically
play music.
General Functions
• The treadmill has bluetooth,you can listen music by the cellphone.
• The running speed of the range: 0.8 to 10.0 KM/H.
• Heart rate detection range: 50 to 199 BPM.
• System self-check, abnormal information prompt functions.
Control Panel and Display
• Distance: it shows the distance.(range:0 km-99.99km)
• Time: it shows time. range:00:00 -99:59second
• Speed: it shows speed. (range:0.8km/h-10km/h
• Calorie: it shows calorie (range:0-999 calorie
• Pulse: it shows heart rate(range: 50 to 199bpm)
Key Functions
Start/Pause:
Under ready condition, press this key, the treadmill runs at the speed of
0.8 km/h, and it will stop working after pressing again.
Mode:
Under ready condition, press this key to set time, distance and calorie
accordingly. Press "speed+"" or "speed-" keys to set the value of time, distance
and calorie. Then press "start" key, the machine will run at 0.8km/h. The speed
can change by speed key.And the set figures will be counted down, when it
comes to "0", machine stops.
Speed +/–:
Under ready condition, press them to change speed when the machine is
running.
Safety Lock Function
Safety locks consist of magnetic sensors, clothes-pins and nylon ropes, which
is a protection in case of emergency. As long as the safety lock off position,
treadmill will stop running fast. The screen will show"----"with warning tone
and the keyboard of the electronic watch allow no operation .The whole screen
will display for 2 seconds and then enter working state with default settings
after putting the safety lock to the right position again.
EN
37