Using The Antennas - Sonoro Meisterstück SO-610 Bedienungsanleitung

3.3

Using the antennas

1. The scope of supply contains a cable antenna and a rod antenna. For
optimum radio reception, one of the two antennae must be used.
2. Screw the desired antenna located on the back of MEISTERSTÜCK to the
FM/DAB antenna connector.
3. If you are using the cable antenna, unfold the cable antenna and align the
antenna so that you have the best possible reception.
For good FM/DAB radio reception, the two ends of the cable antenna
should form a 'T' (dipole) with the connection cable.
A: Recommended alignment for FM
B: Recommended alignment for DAB
For even better reception, connect MEISTERSTÜCK to a suitable house
antenna.
4. If you are using the rod antenna, pull the rod of antenna apart and align the
antenna so that you have the best possible reception.
5. Screw the desired Wi-Fi antenna located on the back of MEISTERSTÜCK to
the WiFi antenna connector. Lift Wi-Fi antenna upwards.
72 © sonoro audio GmbH 2019