Control Setting - Hantech 4619275 Bedienungsanleitungen

Window Sealing Plate Assembly
Exhaust Pipe Assembly
III. Control Setting
1.Control panel operation instructions
1）operation interface：
1.Timer Key 2. Fan Speed Selection Key
6.Sleep Key 7.Mode Selection Key 8. Power Key
1: When the machine is powered on for the first time, the buzzer will play
power-on music, and then the machine will get into standby status.
2: Power Key: press the key to turn on and turn off the machine. In the case of
power on, press the key to turn off the machine; in the case of power off,
press the key to turn on the machine.
3: Mode Selection Key: In the case of power on, press the key to switch between
cooling → fan → dehumidifying mode.
4: Up Key and Down Key: press the two keys to change the setting temperature
or setting time, operate as follows:
While setting temperature, press up key or down key to select the required
temperature (not available in fan or dehumidifying mode).
While setting time, press up key or down key to select the required time.
5: Wind Speed Selection Key:
1）In cooling and fan mode, press the key to select high,low wind speed
operation. But limited by
anti-cold conditions, under certain conditions, it may not run according to the
set wind speed.
2）In dehumidifying mode, pressing the key is invalid, and the fan will forcibly
choose low wind speed operation.
EN
3.Up Key 4.Display
7
5. Down Key