Installation And Adjustment; Install The Heat Pipe Assembly （As Shown In Fig - Hantech 4619275 Bedienungsanleitungen

V.Installation and adjustment
1.Installation：
Warning: before using the mobile air conditioning, keep it upright for at least two hours.
The air conditioning can be easily moved in the room. In the moving process, ensure
that the air conditioning is in the upright position and the air conditioning should be
placed on a flat surface. Do not install and use the air conditioning in the bathroom or
other humid environments.
1.1 Install the heat pipe assembly （as shown in Fig.1）
1）take out the outer connector assembly and the exhaust pipe assembly, and
remove the plastic bags;
2 ） insert the heat pipe assembly (the end of the exhaust joint) into the back
panel vent slot (push to the left) and complete the assembly (as shown in figure 1).
1.2 Installation of window sealing plate components
1）Half open the window，and mount the window sealing plate assembly to the
window (as shown in Fig.2 and
EN
Figure 1
10