Ix.troubleshooting - Hantech 4619275 Bedienungsanleitungen

the drainage pipe becomes dry, so as to keep the inside of the body in a dry state and
prevent it from mildewing.
3:Turn off the machine, unplug the power plug, and wrap the power cord around the
wrapping post; install the water plug and the drainage cover.
4:Remove the exhaust pipe and keep it properly.
5:Cover the air conditioning with a plastic bag. Put the air conditioning in a dry place, keep it
out of the reach of children, and take dust control measures.
6:Remove batteries of the remote control and keep them properly.
Note: ensure that the body is placed in a dry place and keep all machine components
properly.

IX.Troubleshooting

Do not repair or disassemble the air conditioning by yourself. Unqualified repair will
lead to failure of the warranty card, and may cause damage to users or their properties.
Problems Reasons
There is no electricity.
The overflow indicator displays
"FL".
The air
The ambient temperature is too
conditioning
low or too high
does not work.
In
temperature is lower than the set
temperature; in heating mode, the
room temperature is higher than
the set temperature.
cooling mode, the
EN
Solutions
Turn it on after connecting it to a socket
with electricity.
Discharge the water inside.
Recommend to use the machine in at the
temperature of 7-35 ℃ (44-95 ℉).
room
Change the set temperature.
23