Machine Components; Ce Declaration Of Conformity - Collomix Xo 33 R duo Originalbetriebsanleitung

EN
Technical data
Rated power/Current consumption:
Power supply:
Frequency:
No-load speed, first gear
Rpm under load, first gear
Mixing tool 50 - 90 liters:
Weight w/o mixing tool:
Protection class:

Machine components

1 Release button for ON/OFF switch
2 ON/OFF switch
3 Handle frame with rubber buffer
4 Handle
5 Holes for machine mounting to RMX station
6 Ventilation slits
7 Mixing shaft
8 Mixing shaft marking
9 HEXAFIX coupling
10 Mixing tool
11 Protective caps
Noise/vibration levels
Measured values determined in accordance with EN
60745. The A-weighted noise level of the machine is
typically:
Sound pressure level
L [dB(A)]
pA
Xo 33 R duo
Xo 55 R duo
Uncertainty K = 3 dB
Overall vibration level (for mixing of mineral
materials)
Emission level a
Xo 33 R duo
Xo 55 R duo
Uncertainty K = 1,5 m/s
Sound power level
L [dB(A)]
WA
82 db(A) 93 dB(A)
88 dB(A) 99 dB(A)
[m/s ]
2
n
1,6 m/s
2
1,3 m/s
2
2
Xo 33 R duo Xo 55 R duo
1200 W 1600 W
230-240 V 230-240 V
50/60 Hz 50/60 Hz
-500 min - 640 min
-1
-360 min - 450 min
-1
MKD 120 HF MKD 140 HF
6,3 kg 6,9 kg
q / II q / II

WARNING:
The measured values which are provided apply to new
machines. Noise and vibration levels change with day-to-
day use.

NOTE
The vibration level given in these instructions was mea-
sured in accordance with a standardized method of mea-
surement as defined in EN 60745 and can be used for the
purposes of comparing electrical tools with each other. It
is also suitable for a preliminary estimation of vibration
strain. The vibration level which is given represents vi-
bration level for the primary use of the electrical tool. If,
however, the electrical tool is used for any other purpos-
es, with different plug-in tools or with insufficient main-
tenance, the vibration level may vary. This can result in a
significantly higher level of vibration strain over the work
period as a whole.
For a precise estimation of the vibration strain the times
when the machine is switched off have to be taken into
account as well, as do the times when it is running but is
not actually being used. This can result in a significantly
reduced level of vibration strain over the work period as
a whole.

CE Declaration of Conformity

We declare, with sole responsibility, that this product
complies with the following standards or normative
products: EN 55014, EN 61000, EN 60745-1:2009 +
EN60745-2-1:2010 in accordance with the provisions of
directives 2014/30/EU, 2006/42 EC, 2011/65/EU
Technical documentation can be requested from:
Collomix GmbH
Abt. Technische Entwicklung
Daimlerstr. 9, 85080 Gaimersheim, Germany
-1
-1
Gaimersheim, 2018-12-04
Alexander Essing
Managing Director