Care And Maintenance; Warranty - Collomix Xo 33 R duo Originalbetriebsanleitung

Care and maintenance

►Before you carry out any operations on the machine,
and especially when changing the mixing tool, always
pull out the power plug out first.
Clean the machine and the mixing tool immediately after
use. We recommend that you use the Collomix MIXER
CLEAN cleaning bucket for cleaning.
Keep the HEXAFIX coupling clean
and freely moving at all times.
Take the mixing tool out of the
Fett
coupling after you have finished
Grease
your work.
Graisse
Grease the hexagon mount of the
Smar
coupling at regular intervals with
suitable grease.
Keep the ventilation slits clean and clear at all times so
that the machine can be properly cooled. Blocked ven-
tilation slits will lead to irreparable damage to the ma-
chine.
Make sure that the ON/OFF switch moves and releases
smoothly at all times.
The machine is equipped with self-deactivating carbon
brushes. This means that the machine will shut itself
down once a certain level of wear is reached. The carbon
brushes can be replaced by the authorized customer ser-
vice center or by the Collomix Service center.
If the replacement of the supply cord is necessary, this
has to be done by the manufacturer or his agent in order
to avoid a safety hazard
Have repairs carried out only by an approved workshop
or by your Collomix Service.
Only use original Collomix accessories and replacement
parts.
For exploded drawings, lists of replacement parts
and the form for repair orders, please refer to:
http://www.collomix.com
Disposal
The device, accessories and packaging should all be con-
signed for environment-friendly recycling.
Electrical tools which have come to the end of their ser-
vice lives must be made unusable by removing the mains
power cable.
For EU countries only:
Do not dispose of electrical tools with house-
hold waste.
In accordance with EU Directive 2002/96/EC
concerned with used electrical and electronic equipment
and the incorporation of the requirements of the direc-
tive in national legislation, unusable electrical equip-
ment must be collected separately and consigned for
environment-friendly recycling.

Warranty

The manufacturer provides a warranty within the frame-
work of his terms and conditions of delivery in accor-
dance with the requirements of statutory/country-spe-
cific provisions. Should you need to make a claim under
the warranty, please provide us with your invoice or
delivery note.
On no account will any warranty claims be accepted if
any repairs are carried out by third parties. In the event
of any irregularities, please send the machine to us.
Complaints can only be accepted if the device is sent to
the Collomix Service center undismantled.
The warranty does not apply to damages caused by nor-
mal wear, overloading, improper handling, unsuitable
accessories or inadequate maintenance.
Any structural or functional modifications to the ma-
chine which are made without our agreement shall ren-
der the warranty and the Declaration of Conformity null
and void.
Subject to change.
Manufacturer:
Collomix GmbH
Daimlerstrasse 9
85080 Gaimersheim
Germany
EN